ServerLink KVM over IP Module Manual de usuario descargar pdf (Pagina 10)

To access a locked computer, highlight it and press <ENTER>; the admin password challenge appears. After

entering the correct password, you are allowed to control the selected computer. The computer is

automatically re-locked once you switch to another computer.

To disable the password-protected function, select the computer and press <F3> again and enter the correct

password.

Note: The Password-protected computers (“1” marked) are skipped during [Auto Scans and [Manual

Scan] modes.

F5: Manu (Manual Scan)

Press <F5> to enter [Manual Scan] mode. An OSD similar to the following appears:

In this mode, you can scan powered-on computers one by one by keyboard control. Press the <↑> key to

select the previous computer and the <↓> key to select the next computer. Press the <←>, <→> to change

the OSD position.

To abort [Manual Scan] mode, press <ESC>.

F6:  (Check Mark)

This is a scan filter. In order to limit [Auto Scan] or [Manual Scan] to certain computers, mark the computers

with a check mark “V”. To set, highlight the computer, and press <F6> to toggle the mark on or off. Use “Scan

Type” to set up scanning so it includes just the computers you checked.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Sin comentarios

ServerLink KVM over IP Module Manual de usuario Pagina 10